The industry's first microprocessor-controlled, all-digital, High Gain Servo-controlled subwoofers with patent pending room equalization system.
Velodyne has achieved digital perfection with the Digital Drive Series subwoofers. The series consists of 4 digital subwoofers the DD-10 (10 driver, 8 piston diameter), the DD-12 (12 driver, 9.7 piston diameter), the DD-15 (15 driver, 12.7 piston diameter), and the DD-18 (massive 18 driver, 15.2 piston diameter). The Digital Drive Series features Velodynes revolutionary Digital Drive room management technology that takes subwoofer room equalization to a new level. This latest Velodyne innovation allows the subwoofers frequency response in any room to be measured and digitally corrected in real-time using a supplied microphone, and stored in the units memory to assure ideal performance in the consumers listening area.
Features
- Microprocessor controlled with Texas Instruments computer chip
- Digital Drive room equalization system
- Digital High Gain Servo system
- Four listening presets for action adventure, movies, rock pop, jazz classical
- Transformer-less Class-D digital energy recovery amplifier
- Dual tandem voice coil and Kevlar-reinforced cones
Specifications
- Frequency Response
- 17Hz to 120Hz +/- 3dB
- Harmonic Distortion
- <1% (typical)
- High Pass Crossover
- 80Hz at 6dB/octave
- Low Pass Crossover
- 15Hz to 199Hz (variable in 1Hz increments) 6/12/18/24/30/36/42/48 dB per octave slope (variable) Default: 80 Hz @ 24 dB/octave
- Subsonic Filter
- 15Hz to35 Hz (variable in 1Hz increments) 6/12/18/24/30/36/42/48 dB per octave slope (variable) Default: 15 Hz @ 24 dB/octave
- Phase
- 0 to 180 degrees (variable in 15 degree increments)
- Polarity
- Adjustable (+/-)
- Amplifier (Class D)
- 1250 watts RMS(3000 Peak)
- Woofer (Forward Firing)
- 12" (9.7" piston diameter)
- Magnet Structure
- 310 ounces (19.3 lbs)
- Voice Coil
- Tandem 3-inch push-pull
Inputs
- LFE (Mono)
- Line Level (RCA), Balanced (XLR)
- Input (L&R)
- Line Level (RCA)
- Microphone
- Balanced (XLR, cable included)
- Speaker Level (L&R)
- Bare wire, banana plugs, or spade lugs.
Outputs
- Thru (L&R)
- Line Level (RCA)
- Output (L&R)
- Line Level (RCA)
- EQ Output
- Line Level (RCA) for Test Signal L/R and Video (cables included)